Liv Axelsen <liv.axelsenSPAMFILTER@tel-tek.no (Remove SPAMFILTER from the address)>
Cloud point measurements of seven different polymers (Flopaam 5115SH, AN125, Flopaam 3630S, VP 9131, Kypam 7SH, Terraflux, Xanthan) performed at temperatures up to 95 °C.
Different parameters (mechanical degradation, higher salt concentrations, pH adjustment, addition of bentonite, oil and iron) have separately been tested to see if cloud point would be affected.
The samples were heated to 60 and 95 °C and examined visually for cloud point.
February 2014 - June 2014
Statoil Petroleum ASA
Do not show this message again.